Acura TL 2006 Navigation Manual
![Acura TL 2006 Sedan manual cover](/images/slGjBjUpJcRwSRjUWYIVOOGi/thumbs/thumb175x175.webp)
To reset the maintenance light, turn the ignition switch to the "ON" position. Press the "SELECT/RESET" button until the oil life indicator is displayed. Hold the "SELECT/RESET" button for about 10 seconds until the oil life indicator and maintenance code start to blink. Release the button, then hold it again for 5 more seconds until the maintenance light resets.
The recommended tire pressure for a 2006 Acura TL is typically 32 psi for both front and rear tires. However, it is always best to check the sticker on the driver's side door jamb for the most accurate specifications.
First, check the fuse related to the navigation system to ensure it's not blown. If the fuse is intact, try resetting the system by disconnecting the car battery for a few minutes. Reconnect the battery and check if the system reboots. If issues persist, a software update from an Acura dealership may be required.
The 2006 Acura TL typically requires 5W-20 engine oil. It is recommended to use high-quality or synthetic oil for optimal performance and longevity of the engine.
To replace the cabin air filter, open the glove box and remove the damper on the right side. Press the sides of the glove box inward to lower it completely. Behind the glove box, locate the filter cover and remove it. Replace the old filter with a new one and reassemble everything back in place.
A squealing noise upon starting is often caused by a worn or loose serpentine belt. Inspect the belt for any signs of wear or damage, and ensure it is properly tensioned. If needed, replace the belt to resolve the issue.
Improving fuel efficiency can be achieved by ensuring regular maintenance such as oil changes and air filter replacements. Keeping tires properly inflated, avoiding excessive idling, and driving at moderate speeds can also help enhance fuel economy.
Spongy brakes are often due to air in the brake lines. Bleeding the brakes to remove air can resolve this. Additionally, check for any leaks in the brake system or worn brake components that may require replacement.
To program a new key fob, insert the key into the ignition and turn it to the "ON" position. Press the "LOCK" button on the remote, then turn the key to the "OFF" position. Repeat this process three times, ending with the key in the "ON" position. The locks should cycle, indicating the vehicle has entered programming mode. Press the "LOCK" button on the new remote. Turn the ignition off to exit programming mode.
Regular maintenance for a 2006 Acura TL includes oil and filter changes every 5,000 miles, tire rotations every 7,500 miles, and brake inspections every 10,000 miles. A comprehensive inspection and tune-up should be conducted every 30,000 miles. Always refer to the owner’s manual for detailed maintenance intervals and recommendations.