Acura RLX Sport Hybrid 2017 Navigation Manual
![Acura RLX Sport Hybrid 2017 Sedan manual cover](/images/wDkvSAHQJNixgqxqTVHzaUoV/thumbs/thumb175x175.webp)
The recommended maintenance schedule for the Acura RLX Sport Hybrid 2017 includes regular oil changes every 7,500 miles, tire rotations, brake inspections, and fluid checks every 15,000 miles. Major services such as transmission fluid change and spark plug replacement are typically required at 60,000 miles. Refer to the owner's manual for detailed intervals.
If the hybrid system warning light illuminates, it is advised to check for any error messages on the Multi-Information Display. Ensure all hybrid system components are properly connected and not damaged. If the light remains on, consult with a certified Acura technician for a comprehensive diagnostic.
To improve fuel efficiency, ensure your tires are properly inflated, use the ECON mode for better fuel management, and minimize rapid accelerations and harsh braking. Regular maintenance, including air filter replacements and proper engine tuning, also contributes to optimal fuel economy.
The Acura RLX Sport Hybrid 2017 typically requires SAE 0W-20 full synthetic oil for optimal performance and efficiency. Always refer to the owner’s manual for specific oil recommendations and adhere to the recommended oil change intervals.
To reset the TPMS, first ensure all tires are inflated to the recommended pressure. Turn the ignition to the ON position without starting the engine. Press the TPMS button located on the dashboard until the low tire pressure indicator blinks twice, indicating the system has been reset.
If your vehicle won't start, check the battery connections and ensure the battery is charged. Verify the transmission is in Park, and the brake pedal is fully depressed when starting. If the issue persists, it may require professional diagnostic to check the starter, alternator, and other electrical components.
To update the navigation system, visit the Acura Navigation Center website to purchase the latest map update. Follow the provided instructions to download the update onto a USB drive, and then insert the drive into the vehicle’s USB port to initiate the update process.
The Check Engine Light can illuminate due to various issues such as a loose fuel cap, faulty oxygen sensor, or issues with the catalytic converter. It is recommended to have the vehicle’s onboard diagnostic system scanned by a professional to determine the specific cause.
To change the cabin air filter, open the glove box and detach the damper arm. Squeeze the sides of the glove box inward to lower it completely. Remove the filter cover, take out the old filter, and replace it with a new one ensuring the airflow direction arrows are aligned. Reassemble in reverse order.
To jump-start the vehicle, position the donor vehicle close and turn off both vehicles. Connect the positive jumper cable to the positive terminal of the dead battery first, then to the donor battery. Connect the negative cable to the donor battery's negative terminal and the other end to a metal ground on the dead vehicle. Start the donor vehicle, then the Acura. Remove cables in reverse order after starting.