Acura RLX 2018 Navigation Manual
![Acura RLX 2018 Sedan manual cover](/images/fIlEqIvExJFedTkOaANknANV/thumbs/thumb175x175.webp)
To reset the maintenance light on your 2018 Acura RLX, turn the ignition to the ON position without starting the engine. Use the steering wheel controls to navigate to the maintenance menu and select 'Reset'. Confirm your selection to reset the maintenance light.
The 2018 Acura RLX typically requires 0W-20 synthetic motor oil. Always refer to the owner's manual or consult with a certified Acura technician to ensure compatibility.
To improve fuel efficiency on your 2018 Acura RLX: ensure tires are properly inflated, use recommended motor oil, drive at steady speeds, remove excess weight, and perform regular maintenance checks.
The recommended tire pressure for the 2018 Acura RLX is typically 33 psi for both front and rear tires. Always check the sticker located on the driver's side door jamb for the most accurate information.
To pair your smartphone with the 2018 Acura RLX Bluetooth system, enable Bluetooth on your phone, select 'Phone' on the RLX's touchscreen, then 'Add Bluetooth Device'. Follow the on-screen prompts to complete the pairing process.
Common transmission issues for the 2018 Acura RLX include rough shifting and delayed engagement. These can often be resolved by updating the transmission software or replacing the transmission fluid. Consult a certified Acura technician for accurate diagnosis and repair.
It's recommended to replace the air filter every 15,000 to 30,000 miles, depending on driving conditions. Check the air filter during regular maintenance and replace it if it appears dirty or clogged.
If the navigation system in your 2018 Acura RLX is malfunctioning, try restarting the system, checking for software updates, and ensuring the GPS signal is unobstructed. If issues persist, contact an Acura dealership for further assistance.
To replace a headlight bulb on the 2018 Acura RLX, open the hood and locate the back of the headlight assembly. Remove the power connector, unscrew the bulb holder, and replace the old bulb with a new one. Reattach everything securely. Always refer to the owner's manual for detailed instructions.
A squeaking noise when braking in your 2018 Acura RLX could indicate worn brake pads or rotors. Inspect the brake components for wear and replace them if necessary. Regular maintenance and inspection by a qualified technician can prevent this issue.