Acura RL 2008 Navigation Manual
![Acura RL 2008 Sedan manual cover](/images/UzKAdPkNKIowRluUXZENRFtV/thumbs/thumb175x175.webp)
The recommended tire pressure for the Acura RL 2008 Sedan is typically 32 PSI for both front and rear tires. Always check the owner's manual or the sticker on the driver’s side door jamb for the most accurate information.
To reset the maintenance required light on your Acura RL 2008, turn the ignition switch to the ON position, press the Select/Reset button until the engine oil life indicator is displayed, and then press and hold the Select/Reset button for about 10 seconds until the indicator resets.
The Acura RL 2008 Sedan typically requires 5W-20 synthetic oil. However, it's important to consult your owner's manual or a certified mechanic to confirm the best oil for your specific driving conditions.
To improve fuel efficiency, ensure regular maintenance like timely oil changes, maintain proper tire pressure, use recommended fuel grade, reduce excess weight, and drive conservatively avoiding rapid acceleration and heavy braking.
To jump-start a 2008 Acura RL, connect the positive cable to the positive terminal of the dead battery, then to the booster battery. Connect the negative cable to the negative terminal of the booster battery, and finally attach the other end to an unpainted metal surface on the engine of the dead vehicle. Start the booster vehicle and then the Acura RL.
To replace the cabin air filter in the Acura RL 2008, open the glove box, remove the dampener arm, press in on the sides of the glove box to release it, and then you'll find the cabin air filter compartment. Remove the cover and replace the old filter with a new one.
Common causes for the check engine light in an Acura RL 2008 can include a loose gas cap, faulty oxygen sensor, catalytic converter issues, mass airflow sensor failure, or spark plug/ignition coil problems. A diagnostic scan will help pinpoint the exact issue.
Programming a new key fob for the Acura RL 2008 typically requires professional equipment. It is recommended to visit an Acura dealership or a professional locksmith with the necessary tools and expertise to program the key fob.
The timing belt on an Acura RL 2008 should generally be replaced every 60,000 to 90,000 miles or every 7 years, whichever comes first. It's important to follow the maintenance schedule outlined in your owner's manual.
If your Acura RL 2008's transmission is slipping, check the transmission fluid level and condition. If it's low or dirty, consider getting a transmission fluid service. If the problem persists, consult a certified mechanic for a thorough inspection and possible repairs.