Acura RDX 2013 Navigation Manual
![Acura RDX 2013 SUV manual cover](/images/VmiDCljKlOwqvFnwhOaELiLw/thumbs/thumb175x175.webp)
To reset the maintenance light on your 2013 Acura RDX, turn on the ignition without starting the engine. Use the info button on the steering wheel to navigate to the maintenance minder screen. Press and hold the select/reset button until the maintenance reset screen appears. Select 'Reset' and confirm your choice.
The recommended tire pressure for the 2013 Acura RDX is 33 psi for both the front and rear tires. Always check the tire pressure when the tires are cold for an accurate reading.
To pair your phone with the 2013 Acura RDX Bluetooth system, enable Bluetooth on your phone. Press the 'Phone' button on the dashboard, then select 'Add Bluetooth Device'. Follow the prompts on your phone and the vehicle display to complete the pairing process.
The 2013 Acura RDX requires SAE 5W-20 viscosity oil. It is recommended to use synthetic oil for optimal performance and protection.
To change the cabin air filter in the 2013 Acura RDX, open the glove box and remove the damper. Press in on the sides of the glove box to release it. Remove the filter cover, take out the old filter, and replace it with a new one. Reassemble the components in reverse order.
A whining noise when accelerating in your 2013 Acura RDX could be due to a variety of issues such as a failing alternator, a worn serpentine belt, or a problem with the transmission. It's advisable to have a professional mechanic inspect the vehicle to diagnose the exact cause.
To improve fuel efficiency in your 2013 Acura RDX, ensure your tires are properly inflated, perform regular maintenance such as oil changes and air filter replacements, drive at steady speeds, and reduce excess weight in the vehicle.
Common causes for the check engine light in a 2013 Acura RDX include a loose gas cap, faulty oxygen sensor, catalytic converter issues, or spark plug/ignition coil problems. Using an OBD-II scanner can help identify the specific issue.
To replace a headlight bulb on your 2013 Acura RDX, open the hood and locate the back of the headlight assembly. Remove the electrical connector and the rubber dust cover. Unclip the old bulb and replace it with a new one. Reattach the dust cover and the electrical connector.
Possible causes of overheating in a 2013 Acura RDX include a low coolant level, a malfunctioning thermostat, a failing water pump, or a clogged radiator. It's important to address overheating issues promptly to avoid engine damage.