Acura RDX 2011 Navigation Manual
![Acura RDX 2011 SUV manual cover](/images/MFCvbelchjdSBPjZRQSIsEMa/thumbs/thumb175x175.webp)
The recommended engine oil for the Acura RDX 2011 is a synthetic 5W-20 oil. Using this type of oil helps ensure optimal engine performance and fuel efficiency.
To reset the maintenance light, turn the ignition to the ON position without starting the engine. Press the "Select/Reset" button until the engine oil life indicator is displayed. Then, press and hold the button for about 10 seconds until the display blinks. Release the button and hold it again for about 5 seconds until the oil life resets to 100%.
The recommended tire pressure for the Acura RDX 2011 is 32 psi for both the front and rear tires. It's important to check tire pressure regularly to ensure safety and optimal vehicle performance.
To improve fuel economy, ensure your tires are properly inflated, perform regular maintenance such as oil changes and air filter replacements, drive at moderate speeds, and avoid excessive idling.
If your Acura RDX 2011 won't start, check the battery connections for corrosion, ensure the battery is charged, and verify that the vehicle is in Park or Neutral. If the issue persists, it may be necessary to consult a mechanic for further diagnosis.
To pair your phone, ensure Bluetooth is enabled on your device. On the vehicle's audio system, select "Phone Setup" and then "Bluetooth Setup." Choose "Add New Device" and follow the prompts to complete the pairing process, using the passcode provided by the system.
If the air conditioning is not blowing cold air, check if the refrigerant level is low or if there is a leak. Additionally, verify that the compressor is engaging. If these steps do not resolve the issue, a professional inspection may be necessary.
The timing belt on the Acura RDX 2011 should be replaced every 60,000 to 90,000 miles. Regular inspection can help prevent potential engine damage due to a failed timing belt.
Common causes of a check engine light include a loose gas cap, faulty oxygen sensor, failing catalytic converter, or issues with the ignition coils. It's advisable to have a diagnostic scan performed to identify the specific issue.
To replace the cabin air filter, open the glove box and remove the damper arm. Press the sides of the glove box inward to release it. Locate the filter cover, remove it, and take out the old filter. Insert the new filter, ensuring it is positioned correctly, and reassemble the glove box.