Acura NSX 2021 Navigation Manual

The recommended maintenance schedule for the Acura NSX 2021 includes regular oil changes every 7,500 miles, tire rotations every 7,500 miles, brake inspections every 15,000 miles, and transmission fluid changes every 30,000 miles. Always refer to the owner's manual for specific maintenance intervals.
To connect your smartphone, enable Bluetooth on your device and select "Phone" on the NSX's infotainment system. Choose "Add Device" and select your phone from the list. Follow the prompts to complete the pairing process.
The Acura NSX 2021 requires premium unleaded gasoline with an octane rating of 91 or higher to ensure optimal engine performance and efficiency.
If the Acura NSX 2021 doesn't start, check the battery connections for tightness and corrosion. Verify that the key fob has a functioning battery. Ensure the vehicle is in 'Park' or 'Neutral'. If the problem persists, consult a professional mechanic or your local Acura dealership.
The recommended tire pressure for the Acura NSX 2021 is 33 psi for the front tires and 33 psi for the rear tires. Check the tire placard on the driver's side door jamb for the most accurate information.
To activate launch control, ensure the vehicle is in 'Sport Plus' or 'Track' mode. With the car at a complete stop, fully depress the brake pedal with your left foot and the accelerator with your right foot. Release the brake when ready to launch. Always use launch control in a safe, controlled environment.
If the check engine light comes on, it is recommended to check for any obvious issues such as a loose gas cap. If the light remains on, schedule a diagnostic check with an Acura-certified technician to identify and resolve potential issues.
To improve fuel efficiency, maintain proper tire pressure, perform regular maintenance, and drive smoothly by avoiding rapid acceleration and heavy braking. Utilizing the vehicle's hybrid features efficiently can also contribute to better fuel economy.
To replace the air filter, open the hood and locate the air filter housing. Remove the clips or screws securing the housing cover, take out the old filter, and insert the new one. Ensure it's seated properly and reattach the housing cover securely.
To reset the maintenance minder, turn the ignition to the 'ON' position without starting the engine. Press the 'Select/Reset' button until the oil life indicator is displayed. Hold the button until the indicator resets to 100%.