Acura MDX 2008 Navigation Manual

To reset the maintenance light, turn the ignition switch to the ON position without starting the engine. Use the INFO button to select the "Maintenance Info" menu. Press and hold the SEL/RESET button for about 10 seconds until the maintenance reset screen appears. Use the UP/DOWN arrows to select "Reset" and confirm by pressing SEL/RESET.
The 2008 Acura MDX typically requires 5W-20 synthetic motor oil. Always refer to the owner's manual or consult with a professional for the most accurate information.
To pair your phone, turn on the Bluetooth feature on your phone. Press the PHONE button on the MDX's audio system, then select "Phone Setup." Choose "Add a New Phone," and follow the prompts on both the vehicle's display and your phone to complete the pairing process.
If the key fob is not working, first try replacing the battery. If the issue persists, ensure there is no interference from other electronic devices. If it still doesn't work, it might need reprogramming or replacement, which can be done at an Acura dealership.
Locate the cabin air filter behind the glove compartment. Open the glove compartment and remove the retaining stops to allow it to hang down. Remove the filter cover and slide out the old filter. Insert the new filter, ensuring it is oriented correctly, and reassemble the glove compartment.
Possible reasons for engine overheating include a low coolant level, a faulty thermostat, a broken radiator fan, or a leaking radiator. Check these components and refill or repair as necessary. If the problem persists, consult a professional mechanic.
The 2008 Acura MDX has a towing capacity of up to 5,000 pounds when properly equipped with the towing package. Always ensure your vehicle is equipped and prepared for towing before attempting to tow heavy loads.
To check the transmission fluid level, park the vehicle on a level surface and turn off the engine. Locate the transmission dipstick, remove it, and wipe it clean. Reinsert it fully, then remove it again to check the fluid level. The fluid should be between the upper and lower marks.
Common causes of rough idle include dirty fuel injectors, a clogged air filter, or a malfunctioning oxygen sensor. Regular maintenance and diagnostics can help identify and resolve these issues.
To replace a headlight bulb, open the hood and locate the back of the headlight assembly. Remove the electrical connector and the rubber weather seal. Release the retaining clip and remove the old bulb. Insert the new bulb, being careful not to touch the glass, and reassemble the components.