Acura MDX 2007 Navigation Manual
![Acura MDX 2007 SUV manual cover](/images/XcNHSFKzQPNozZvttYjXxOcG/thumbs/thumb175x175.webp)
For the 2007 Acura MDX, it is recommended to use SAE 5W-20 motor oil. Make sure the oil is labeled with an API Certification Seal for gasoline engines.
It is advised to change the transmission fluid every 30,000 to 60,000 miles. However, check your owner's manual for the manufacturer's specific recommendations.
Poor fuel economy can be caused by several issues, including improper tire pressure, dirty air filters, or old spark plugs. Regular maintenance checks can help identify and resolve these issues.
To reset the maintenance required light, turn the ignition to the ON position, press the Select/Reset knob until the engine oil life indicator is displayed, then press and hold the knob until the oil life display begins to blink. Release the knob and then press and hold it again until the display resets to 100%.
The 2007 Acura MDX has a towing capacity of up to 5,000 pounds when properly equipped with the necessary towing package.
Check the A/C fuse and relay for any issues. Ensure that the refrigerant levels are adequate. If both are fine, it may be a problem with the compressor or the climate control system that requires professional diagnosis.
The recommended tire pressure for the 2007 Acura MDX is generally 33 PSI for both front and rear tires. Always refer to the placard located on the driver's door jamb for the most accurate information.
Ensure that your tires are properly inflated and balanced. Consider replacing worn-out suspension components such as shocks and struts. Investing in high-quality tires can also improve ride comfort.
A rough idle can be caused by dirty fuel injectors, a faulty idle air control valve, or vacuum leaks. Regular maintenance and using fuel injector cleaner can help mitigate this issue.
Open the glove compartment and remove the damper cord on the right side. Squeeze the sides of the glove compartment inward to release it. The cabin air filter is located behind it. Slide out the old filter and replace it with a new one, ensuring that the airflow direction arrows are pointing correctly.