Whistler WS1025 Desktop 300 Channels Quick Start Guide
![Whistler WS1025 Desktop Radio Scanner 300 Channels manual cover](/images/71c23c59f0be57987b8aa85a/thumbs/thumb175x175.webp)
To program frequencies into the Whistler WS1025, press 'PGM', select the desired channel using the numeric keypad, then enter the frequency and press 'ENT'.
Ensure the antenna is properly connected and the scanner is not in 'Weather' mode. Check the programmed frequencies to ensure they are correct and active in your area.
To reset the Whistler WS1025, turn off the scanner, hold down '2', '9', and 'ENT', then turn the scanner back on while holding these buttons.
No, the Whistler WS1025 cannot scan trunked radio systems as it is designed only for conventional analog scanning.
To improve reception, try repositioning the antenna, using an external antenna, and ensuring there are no obstructions or interference sources nearby.
The WS1025 can use any standard BNC connector antenna. Consider using a high-gain or outdoor antenna for better reception.
Yes, to lock out a frequency, press 'L/OUT' while the scanner is stopped on the unwanted frequency.
The WS1025 does not support firmware updates as it is an analog scanner with fixed software.
Clean the WS1025 with a soft, dry cloth. Avoid using solvents or abrasive cleaners. Periodically check the antenna connection and power cord for wear.
To scan specific banks, press 'MAN', use the arrow keys to select the desired bank, and press 'SCAN'. Ensure the bank is not locked out.