Whirlpool WFE505W0HW Installation Instructions
![Whirlpool WFE505W0HW Range manual cover](/images/WivcHgfaCCCvggIZTOTcQYAm/thumbs/thumb175x175.webp)
To perform a self-cleaning cycle, remove all racks and accessories from the oven. Close the oven door and select the 'Self-Clean' option on the control panel. Choose the desired cleaning length and press 'Start'. The door will lock, and the cleaning cycle will begin.
If your oven is not heating properly, check if the range is plugged in and the circuit breaker is not tripped. Ensure the oven controls are set correctly. If the issue persists, it may require service from a qualified technician.
If the control panel is not responding, try resetting the range by unplugging it or turning off the circuit breaker for a few minutes. If the problem continues, the control panel may need to be serviced or replaced.
To clean the glass cooktop, use a non-abrasive cleaner specifically designed for glass surfaces. Apply the cleaner when the cooktop is cool, and use a soft cloth or sponge to wipe away residue. Avoid using steel wool or other abrasive materials.
To change the oven light bulb, first ensure the oven is cool and unplugged. Remove the glass bulb cover by turning it counterclockwise. Replace the bulb with a new 40-watt appliance bulb, then reattach the bulb cover.
If the oven door won't unlock after a self-clean cycle, allow the oven to cool completely. If the door remains locked, try resetting the power to the range. If the issue persists, contact a service technician.
To prevent scratching, use cookware with smooth, flat bottoms and avoid sliding pots and pans across the surface. Always lift cookware when moving it and clean spills immediately to prevent residue buildup.
Strange noises can be due to thermal expansion or contraction, especially during heating or cooling. If the noise is loud or unusual, inspect the fan or other moving parts to ensure they are not obstructed or damaged.
To calibrate the oven temperature, press and hold the 'Bake' button until the display shows a temperature offset. Use the '+' or '-' buttons to adjust the temperature calibration as needed, then press 'Start' to save the changes.
If the surface burners aren't igniting, ensure the burners are properly seated and clean. Check for any blockages in the burner ports. Make sure the range is properly connected to the power supply. If the issue continues, it might require professional service.