Whirlpool WEGA25H0HZ Installation Instructions

To clean the grates, remove them from the cooktop and soak them in warm, soapy water. Use a non-abrasive pad to scrub stubborn stains. Rinse thoroughly and dry before placing them back on the cooktop.
Check if the range is properly plugged in and the circuit breaker is not tripped. Ensure the burner caps are correctly placed. If the problem persists, the igniter might need cleaning or replacement.
To calibrate the oven temperature, press and hold the "Bake" button until the display shows a calibration option. Use the arrow keys to adjust the temperature as needed, then press "Start" to save the changes.
Remove all racks and accessories from the oven. Follow the oven's manual instructions to initiate the self-cleaning cycle, which typically involves locking the oven door and selecting the self-clean mode.
Uneven heating can be caused by a faulty bake element or temperature sensor. Ensure that the oven racks are positioned correctly and consider using an oven thermometer to verify temperature accuracy.
To reset the control panel, unplug the range from the power outlet or switch off the circuit breaker for one minute. Restore power and check if the control panel responds correctly.
Regularly clean the burner grates, oven interior, and control panel. Inspect gas connections for leaks and check that the oven door seals tightly to maintain energy efficiency.
Refer to the user manual for specific error codes. Common solutions include checking power connections, resetting the range, or contacting customer support for unresolved issues.
It's safe to use aluminum foil on oven racks, but avoid covering the bottom of the oven to prevent blocking heat circulation and damaging the oven.
Regularly test safety features like the oven door lock and child safety controls. Consult the manual for instructions and perform visual inspections to ensure all components are intact.