Whirlpool RCS2012RS Installation Instructions
![Whirlpool RCS2012RS Cooktop manual cover](/images/OcubOmvVbbzXSuijpjobQVrK/thumbs/thumb175x175.webp)
To safely clean the cooktop, ensure it is cool. Use a soft cloth or sponge with mild soap and water. Avoid abrasive cleaners to prevent surface damage.
Check if the burner is properly seated and clean any debris from the burner ports. If the issue persists, inspect the igniter for damage and consult the manual for further troubleshooting.
Yes, you can use cast iron cookware. However, ensure the bottom of the cookware is smooth to avoid scratching the cooktop surface.
To adjust the flame, turn the control knob to the desired setting. If the flame is uneven, inspect the burner cap and ports for blockages.
After a power outage, simply turn off all control knobs and then back on to reset the cooktop. If there are issues, check the circuit breaker and refer to the manual for additional steps.
To prevent scratches, use cookware with smooth bottoms and avoid sliding pots and pans across the surface. Regularly clean the surface to remove any particles that might cause scratching.
If you smell gas, immediately turn off the cooktop and ventilate the area by opening windows. Do not use electrical appliances or flames. Contact your gas supplier or a technician to inspect the cooktop.
Installation should be performed by a qualified technician to ensure safety and compliance with local codes. Refer to the installation guide for detailed instructions.
Clean the burner grates and caps regularly, ideally once a week, or more often if spills occur. Use warm, soapy water and a non-abrasive scrubber.
If the igniter is not working, light the burner manually using a match or lighter. Hold the flame near the burner ports while turning the control knob to the 'light' position. Exercise caution to avoid burns.