Volkswagen Sharan 2016 Owner's Manual
![Volkswagen Sharan 2016 Minivan manual cover](/images/zYIywwpHWVijZKXBGWXjrOCF/thumbs/thumb175x175.webp)
To pair your smartphone, turn on the Bluetooth on your phone, navigate to the 'Phone' menu on the Sharan's infotainment screen, select 'Search for devices', and choose your phone from the list. Confirm the pairing code on both devices to complete the process.
The recommended tire pressure for the Volkswagen Sharan 2016 can vary depending on load and driving conditions, but generally, it should be around 35 PSI (2.4 bar) for the front tires and 33 PSI (2.3 bar) for the rear tires. Always refer to the sticker on the driver's side door for exact specifications.
To reset the service light, turn off the ignition, press and hold the trip reset button, turn on the ignition without starting the engine, and release the button. Then, press the 'MIN' button on the dashboard until the display resets.
The Volkswagen Sharan 2016 typically requires VW 502 00 or VW 504 00 specification oil, which is usually a 5W-30 fully synthetic oil. Always check the owner's manual or consult with a Volkswagen service center for confirmation.
To replace the headlight bulb, open the hood, remove the headlight cover cap, disconnect the electrical connector, remove the old bulb, insert the new bulb, reconnect the electrical connector, and reattach the cover cap. Ensure the bulb is securely seated and test the lights before closing the hood.
Common causes can include a dead battery, faulty starter motor, ignition switch issues, or a problem with the fuel system. Checking the battery charge and connections is a good starting point. If the issue persists, a professional diagnostic is recommended.
To check the coolant level, ensure the engine is cool, open the hood, and locate the coolant reservoir. The level should be between the 'MIN' and 'MAX' marks on the side of the reservoir. If it is low, add the recommended coolant type as specified in the owner's manual.
To improve fuel efficiency, regularly maintain your vehicle, ensure tires are properly inflated, drive at steady speeds, avoid rapid acceleration and heavy braking, and remove unnecessary weight from the vehicle. Using cruise control on highways can also help.
If the air conditioning is not cooling, check if the system is set to the correct temperature and mode. Ensure that the refrigerant levels are adequate; low refrigerant could be a cause. If the issue persists, have the system checked for leaks or electrical issues by a professional.
To change the wiper blades, lift the wiper arm away from the windshield, press the small tab on the underside of the wiper blade to release it, then slide the blade off the arm. Align the new blade's connector with the hook on the arm and slide it into place until it clicks securely.