Vax CLSW-SGKS, CLCW-MSBS Safety Guide
![Vax CLSW-SGKS, CLCW-MSBS manual cover](/images/570acddb6b21c619955cc8c1/thumbs/thumb175x175.webp)
To assemble the Vax CLSW-SGKS, start by attaching the handle to the main body. Ensure it clicks into place securely. Then, attach the desired cleaning tool to the end of the hose. Finally, plug the vacuum into a power source.
Check if the dust container is full and empty it if necessary. Inspect the filters for blockages and clean or replace them as needed. Also, ensure all parts are securely connected and check the hose for any obstructions.
It is recommended to clean the filters every 3-6 months, or more frequently if you use the vacuum often or in areas with high dust levels.
Yes, the filters for the Vax CLSW-SGKS are washable. Rinse them under warm water and allow them to completely dry before reinserting them into the vacuum.
Check that the vacuum is plugged in and the power outlet is working. Ensure the power switch is in the 'on' position. If it still doesn't work, inspect the fuse or circuit breaker in your home.
Regularly remove hair and debris from the brush bar. To do this, disconnect the vacuum from power, remove the brush bar, and use scissors or a brush to clean it. Reattach it securely once done.
Store your Vax vacuum in a dry, cool place. Ensure all attachments are stored properly and the power cord is wound neatly to prevent damage.
A smell during use could be due to a full dust container or dirty filters. Empty the dust container and clean the filters. If the problem persists, check for blockages in the hose and attachments.
Regular maintenance is key. Empty the dust container frequently, clean the filters, and check for any blockages in the hose or attachments. Also, ensure all parts are securely connected.
Turn off and unplug the vacuum immediately. Check for blockages in the hose, filter, and brush bar. Allow it to cool for at least 30 minutes before attempting to use it again.