Vauxhall Movano 2012 Owner’s Manual
![Vauxhall Movano 2012 manual cover](/images/b3b3fd6a94e7b7c5d8690af4/thumbs/thumb175x175.webp)
To reset the service light, turn the ignition to the "On" position without starting the engine. Press and hold the trip reset button until the service light begins to flash, then release it. Turn the ignition off and back on to ensure the light is reset.
The recommended tire pressure for a 2012 Vauxhall Movano is typically 55 PSI for the front tires and 80 PSI for the rear tires. Always refer to the vehicle's manual or the sticker located on the driver's door for accurate information.
If your Vauxhall Movano is having trouble starting, check the battery for charge and connections. Inspect the starter motor and alternator, and ensure the fuel system is delivering fuel properly. If the issue persists, consult a mechanic.
The recommended oil type for a 2012 Vauxhall Movano is typically 5W-30 fully synthetic oil. Always check the owner's manual for specific requirements and specifications.
To replace a headlight bulb, open the bonnet and locate the back of the headlight assembly. Remove the cover, disconnect the wiring harness, and replace the old bulb with a new one. Reattach the wiring and cover, ensuring everything is secure.
Common transmission issues with the 2012 Vauxhall Movano include difficulty shifting gears, transmission slipping, and unusual noises. Regular maintenance and fluid checks can help prevent these issues.
To improve fuel efficiency, keep your tires properly inflated, use the recommended grade of motor oil, and ensure regular maintenance like air filter and spark plug replacements. Avoid excessive idling and aggressive driving.
The towing capacity of a 2012 Vauxhall Movano can vary based on the model and configuration, but it generally ranges from 2,500 kg to 3,000 kg. Consult the owner's manual for specific details.
To check the brake fluid level, locate the brake fluid reservoir under the bonnet. The reservoir is typically transparent with minimum and maximum level markings. Ensure the fluid is between these marks and top up if necessary with the correct type of fluid.
To replace the air filter, open the bonnet and locate the air filter housing. Remove the cover, take out the old air filter, and insert a new one. Ensure the new filter is seated correctly and secure the cover back in place.