Toro Eurorecycler 21080 Installation Instructions
![Toro Eurorecycler 21080 Mower manual cover](/images/QCWDMGUVlUVWnQhYcjhSOpSH/thumbs/thumb175x175.webp)
To start the Toro Eurorecycler 21080 Mower, ensure that the fuel valve is open, the choke is engaged if the engine is cold, and the throttle is set to 'Fast'. Pull the starter handle firmly until the engine starts.
Check if there is fuel in the tank and that the fuel valve is open. Verify that the spark plug is clean and properly connected. Ensure the air filter is clean and not clogged. If these steps don't work, consult the manual or a professional technician.
Change the oil after the first 5 hours of use, and then every 25 hours of operation or at the beginning of each mowing season. Use SAE 30 or 10W-30 oil for best performance.
Ensure the blade is sharp and not damaged. Mow when grass is dry and adjust the mowing height to avoid cutting more than one-third of the grass blade at a time.
After each use, use a garden hose to remove grass clippings and debris from the deck. Ensure the mower is off and cool before cleaning to prevent injury.
Locate the air filter cover, remove it by unscrewing or unclipping it, take out the old filter, and replace it with a new one. Ensure the new filter is installed correctly before replacing the cover.
Check for debris stuck in the blade or under the deck. Inspect the blade for damage or imbalance. Tighten any loose parts and ensure the blade is securely attached.
Drain the fuel tank or add a fuel stabilizer, clean the mower thoroughly, and store it in a dry location. Remove the battery if applicable, and cover the mower to protect it from dust and moisture.
Check the tire pressure to ensure it's even on all wheels. Inspect the blade for sharpness and wear. Adjust the mowing height and verify that the deck is level.
Regularly check the oil level, air filter, and spark plug. Inspect the blade for sharpness and balance, and clean the mower deck after each use. Ensure all nuts and bolts are tight.