Thule T2 918XT Instructions
![Thule T2 918XT manual cover](/images/068dc14cfaface2273a08099/thumbs/thumb175x175.webp)
To install the Thule T2 918XT, first ensure your vehicle has a compatible hitch receiver. Slide the rack into the receiver and secure it with the hitch pin. Tighten the anti-wobble knob to minimize movement.
The Thule T2 918XT can carry up to 60 pounds per bike, allowing for a total of 120 pounds. Ensure your bikes do not exceed this weight limit for safe transport.
The wheel trays on the Thule T2 918XT can slide along the base to accommodate different wheelbases. Loosen the knobs on the trays, adjust to the desired position, and retighten to secure.
If the rack is wobbling, check that the anti-wobble knob is tightened properly. Make sure the hitch pin is securely attached and inspect the hitch receiver for any signs of damage or wear.
Yes, the Thule T2 918XT can be used with electric bikes as long as they do not exceed the weight limit of 60 pounds per bike. Always check your bike's weight before loading.
Regularly inspect the rack for loose bolts and tighten as necessary. Clean the rack with mild soap and water to remove dirt and debris, and lubricate moving parts to prevent rust.
Yes, the Thule T2 918XT features a folding mechanism. Pull the lever located at the base to fold the rack when it is not in use, providing better clearance and storage.
Ensure the wheel holders are adjusted to the correct size. Use the ratcheting arms to secure the front wheel and adjust the rear wheel strap for a snug fit.
Use the integrated cable locks to secure each bike to the rack. Additionally, you can use an additional lock to secure the rack itself to the vehicle's hitch for added security.
To uninstall, remove the bikes and any securing locks. Loosen the anti-wobble knob, then remove the hitch pin. Carefully slide the rack out of the hitch receiver and store it in a safe place.