Thule T2 916XT Instructions
![Thule T2 916XT manual cover](/images/8e8d638e6f8fbe06db43d86e/thumbs/thumb175x175.webp)
Begin by placing the rack on your vehicle's hitch receiver. Align the pin holes, insert the hitch pin, and secure it with the clip. Tighten the knob to secure the rack. Follow the Thule instructions for a complete installation guide.
The Thule T2 916XT can hold up to 60 lbs per bike, with a total capacity of 120 lbs for two bikes.
Regularly clean the rack with mild soap and water to remove dirt and debris. Inspect moving parts and lubricate them as needed with a non-corrosive spray. Check for any signs of wear or damage and tighten all bolts periodically.
The Thule T2 916XT is designed for 2-inch hitch receivers. An adapter may be required for smaller sizes, but it is recommended to use a compatible hitch receiver to ensure stability and safety.
Use the adjustable wheel loops and the ratcheting arm to secure the front wheel of each bike. Ensure the wheel loops snugly fit the tires and the arm is tightly clamped over the front wheel to prevent movement.
Yes, you can expand the capacity of the Thule T2 916XT with an add-on (sold separately) to carry up to 4 bikes. Make sure your vehicle's hitch and the rack can support the additional weight.
Ensure that the hitch pin is properly inserted and the knob is fully tightened. Check that all bolts are secure. If wobbling persists, consider using a hitch stabilizer to minimize movement.
To fold the rack, first ensure no bikes are mounted. Pull the release handle and lift the rack to the upright position until it clicks into place. This reduces the rear profile of your vehicle for easier parking and storage.
Yes, the rack can accommodate fat-tire bikes with tires up to 5 inches wide. You may need to purchase a separate fat-tire wheel strap kit for optimal fit and security.
When fully assembled, the Thule T2 916XT measures approximately 53 x 13 x 37 inches. Ensure you have sufficient space for installation and use.