Thule Sup Taxi 810 Instructions
![Thule Sup Taxi 810 manual cover](/images/2e73417ce85f5c5925f3f0c9/thumbs/thumb175x175.webp)
To install the Thule Sup Taxi 810, first place the rack on your vehicle's crossbars. Align the rubber straps with the crossbars and secure them using the included tensioning knobs. Ensure the rack is centered and tightened properly before loading your SUP.
The Thule Sup Taxi 810 is designed to carry up to two stand-up paddleboards with a maximum combined weight of 55 lbs (25 kg). Ensure that your crossbars can support this weight as well.
The Thule Sup Taxi 810 is equipped with a built-in steel-reinforced cable lock. After loading your SUP, wrap the cable around the boards and lock it using the provided key to secure them against theft.
Regularly inspect the rubber straps and locking mechanism for wear and tear. Clean the rack with mild soap and water, and lubricate the lock cylinder with a silicone-based lubricant to keep it functioning smoothly.
Yes, the Thule Sup Taxi 810 is compatible with most factory-installed crossbars as long as they fall within the specified dimensions. Ensure the crossbars are securely mounted and can support the weight of the SUPs.
If the straps become loose, stop immediately in a safe location to retighten the tensioning knobs. Ensure the straps are properly aligned and tightened before resuming your journey.
The Thule Sup Taxi 810 features telescoping arms that can be adjusted to accommodate different board widths. Simply slide the arms to fit the width of your paddleboards and lock them in place using the adjustment knobs.
Ensure your SUPs are securely fastened and the lock is engaged. Drive at reduced speeds, especially in windy conditions, and avoid sudden movements to maintain stability. Regularly check the straps during long trips.
When not in use, remove the Thule Sup Taxi 810 from your vehicle and store it in a cool, dry place. Avoid prolonged exposure to sunlight and ensure it's clean and dry before storage to prevent corrosion.
Yes, the Thule Sup Taxi 810 is designed to fit both square and aerodynamic crossbars. Ensure the crossbars are within the specified dimensions and can support the load.