Thule Sidearm 594XT Instructions

To install the Thule Sidearm 594XT, first ensure your roof rack is compatible and securely mounted. Position the carrier on the crossbars and use the included hardware to tighten the clamps around the bars. Make sure the Sidearm is centered and parallel to your vehicle for optimal performance.
Lift the bike onto the carrier with the front wheel in the wheel tray. Adjust the arm to hold the front wheel securely and tighten the rear wheel strap. Make sure the bike is stable before driving.
Check that the arm is properly adjusted and tightened. Ensure the rear wheel strap is secure. If the fit is still loose, inspect the carrier for any damage or wear and consult the manual for specific adjustments.
Regularly inspect the carrier for signs of wear or damage. Clean the carrier with mild soap and water, and lubricate moving parts to ensure smooth operation. Check all bolts and screws are tight before each use.
Yes, the Thule Sidearm 594XT is designed to fit most bike sizes and types, including mountain bikes and road bikes with wheel sizes from 20 to 29 inches.
Use the integrated cable lock to secure the bike to the carrier. Additionally, ensure the carrier is locked to the roof rack using the locking knob.
Check for dirt or debris in the arm mechanism and clean it as needed. Lubricate the moving parts with a silicone-based lubricant to improve movement. If the issue persists, consult Thule support.
Yes, the Thule Sidearm 594XT is compatible with most factory and aftermarket roof racks. Ensure that the crossbars meet the minimum width and maximum thickness requirements as specified in the manual.
The arm of the Thule Sidearm 594XT is adjustable to fit different wheel sizes. Simply move the arm to the appropriate position based on the wheel size, making sure it secures the front wheel snugly.
Ensure that the bike is securely fastened and all locks are engaged. Drive at moderate speeds and avoid sudden stops or sharp turns. Regularly check the bike and carrier during long trips.