Thule Range 9057 Instructions

To install the Thule Range 9057, position the carrier onto the hitch receiver, ensuring it is level. Secure it by tightening the hitch pin and locking the mechanism with the provided key. Always refer to the user manual for detailed instructions and safety tips.
Check if the hitch pin is properly tightened and locked. Ensure the carrier is correctly mounted on the hitch receiver. If wobbling persists, consider using a hitch stabilizer to minimize movement.
Regularly clean the carrier with mild soap and water to remove dirt and debris. Check for any loose bolts or parts and tighten them as necessary. Lubricate moving parts occasionally and store the carrier in a dry place when not in use.
The Thule Range 9057 is compatible with most vehicles equipped with a 2-inch hitch receiver. Always check vehicle-specific compatibility and weight limitations before installation.
The Thule Range 9057 has a maximum load capacity of 165 lbs. Ensure not to exceed this limit to maintain safety and performance.
Yes, the Thule Range 9057 features a tilting mechanism that allows trunk access even when the carrier is installed. Always ensure the carrier is unloaded when tilting for better stability.
If the locking mechanism is jammed, apply a lubricant to the lock and try to gently turn the key back and forth to loosen it. Avoid forcing the key to prevent breakage.
Rinse the carrier thoroughly with fresh water to remove salt residues. Dry it completely and apply a protective wax or spray to prevent corrosion. Regular checks for rust and damage are recommended.
Before each use, ensure all bolts and attachments are secure. Check that the locking mechanism is functional and the load is evenly distributed and properly secured.
Utilize the built-in lock system and consider adding an additional hitch lock for extra security. Parking in well-lit and monitored areas can also deter theft.