Thule Motion XT 6295 Instructions

To install the Thule Motion XT 6295, place the cargo box on the roof rack, aligning the clamps with the crossbars. Tighten the clamps using the PowerClick quick-mount system until you hear a click, indicating they are secure.
The Thule Motion XT 6295 has a maximum load capacity of 165 lbs (75 kg). Ensure not to exceed this limit to maintain safety and performance.
Regularly clean the exterior with mild detergent and water, lubricate the locks with graphite powder, and store the box in a dry place when not in use. Check all components for wear and tighten any loose parts.
If the lock is jammed, apply a small amount of graphite powder into the lock cylinder. Gently wiggle the key back and forth to distribute the lubricant. Avoid using excessive force.
Yes, the Thule Motion XT 6295 is designed to accommodate skis and snowboards. Ensure they are securely fastened and do not exceed the internal dimensions of the cargo box.
Ensure the cargo box is properly aligned and secured. Check that the clamps are tight and there are no loose items inside the box. Consider using a fairing on your roof rack to reduce wind noise.
Distribute weight evenly inside the box, placing heavier items in the center and lighter items towards the ends. Secure loose items to prevent movement during transit.
The Thule Motion XT 6295 is compatible with most Thule rack systems and many factory racks. Verify that your roof rack is within the specified dimensions and weight capacity before installation.
After closing the lid, turn the key until you hear a click, indicating it is locked. The key cannot be removed unless the box is securely closed and locked.
It is not recommended to go through an automatic car wash with the Thule Motion XT 6295 attached, as it may damage the box or the vehicle. Hand washing is advised.