Thule Hyper 612 Instructions
![Thule Hyper 612 manual cover](/images/e4547080b6d5be7b60573169/thumbs/thumb175x175.webp)
To install the Thule Hyper 612, position the box on the roof rack, align the clamps with the crossbars, and tighten them securely. Ensure the box is centered and balanced. Refer to the user manual for specific torque settings.
Check for any obstructions inside the box, ensure items are evenly distributed, and that the locking mechanism is not blocked. Make sure the lid is aligned with the base and try closing again.
Regularly clean the exterior with mild soap and water, lubricate the locks with graphite powder, and inspect the mounting hardware for any signs of wear or damage. Store it in a cool, dry place when not in use.
Place heavier items at the bottom and center of the box for stability, and use the provided straps to secure the load. Make sure the lid can close without obstruction.
Inspect the seal around the lid for damage or debris. Clean the seal and replace it if necessary. Ensure the box is closed and locked properly during use.
Yes, the Thule Hyper 612 features a dual-side opening for easy access to your gear from either side of the vehicle.
Check if the key is inserted correctly and not damaged. Lubricate the lock with graphite powder. If the problem persists, consult a Thule service center for further assistance.
After installation, gently shake the box to ensure it doesn't move. Verify that all clamps are tightly secured and locked. Follow the torque specifications in the manual.
While the Thule Hyper 612 is designed for highway speeds, it's recommended to follow local speed regulations and drive below 80 mph (130 km/h) for safety and stability.
Use a soft cloth with mild soap and water to clean the surface. Avoid abrasive materials or harsh chemicals that could damage the finish. Rinse thoroughly and dry with a soft towel.