Thule Gateway 9006XT Instructions
![Thule Gateway 9006XT manual cover](/images/9533097943d961bd4c4d10d9/thumbs/thumb175x175.webp)
To install the Thule Gateway 9006XT, first ensure the bike rack is unfolded. Attach the rack to the rear of your vehicle, hooking the top straps over the top edge of your trunk or hatch. Adjust the lower straps to secure the bottom, and tighten all straps evenly. Ensure the rack is stable before loading bikes.
The Thule Gateway 9006XT can carry up to three bikes with a total maximum load capacity of 105 lbs (approx. 48 kg). Ensure that no single bike exceeds 35 lbs.
To prevent bike sway, ensure the bikes are properly secured using the provided straps. Thule's patented FitDial system provides a snug fit for each bike. Use additional anti-sway cradles if necessary for added stability.
The Thule Gateway 9006XT is designed to fit most sedans, hatchbacks, and SUVs. However, it may not be suitable for vehicles with spoilers or certain non-standard features. Consult the Thule Fit Guide for vehicle compatibility.
Regularly inspect the rack for any signs of wear or damage. Clean the rack with mild soap and water, and lubricate moving parts with a silicone-based lubricant. Store in a dry place when not in use.
If the straps become frayed, it is important to replace them immediately to ensure the safety and security of the bike rack. Contact Thule customer support or visit an authorized dealer for replacement parts.
Accessing the trunk with the Thule Gateway 9006XT installed can be difficult, especially when loaded with bikes. It is recommended to unload the bikes and carefully tilt the rack if trunk access is necessary.
Use a cable lock to secure your bikes to the rack. Loop the lock through the bike frames and the rack frame. For added security, consider using a locking strap or Thule's integrated locking system if available.
Ensure all straps are tightened and the FitDial is correctly set. Check for loose parts or damage. Redistribute the weight of the bikes if necessary and confirm that the vehicle surface is clean and dry.
To fold the Thule Gateway 9006XT, remove all bikes and release the tension on the straps. Disengage the hubs to fold the upper arms and bottom foot. Secure the arms with the built-in strap for compact storage.