Thule Atlantis 685 2009 Instructions
![Thule Atlantis 685 2009 manual cover](/images/53ac56f736d3c7b1ce799a1c/thumbs/thumb175x175.webp)
To install the Thule Atlantis 685, ensure your roof rack is compatible. Place the box centrally on the roof bars, secure the clamps around the bars, and tighten them evenly. Double-check stability before driving.
The Thule Atlantis 685 has a maximum load capacity of 150 lbs (68 kg). Always distribute weight evenly and do not exceed this limit.
If noise occurs, check that the box is securely fastened, ensure that the load is evenly distributed, and verify that all clamps are tightened properly. Adjust the position if necessary.
Clean the Thule Atlantis 685 with mild soap and water. Avoid abrasive cleaners. Regularly check for any signs of wear or damage and lubricate locks with graphite powder.
If the lock is stuck, apply a graphite-based lubricant to the lock cylinder. Gently wiggle the key to try and free the mechanism. Avoid using excessive force.
When driving with the Thule Atlantis 685, avoid sudden stops and sharp turns. Be mindful of added height, especially in low-clearance areas, and monitor changes in fuel efficiency.
Ensure the box is locked at all times when not in use. Consider using additional security cables or locks to secure it to the roof rack for added protection.
Yes, the Thule Atlantis 685 features dual-side opening, allowing convenient access from either side of the vehicle.
Ensure that the load inside is not obstructing the lid. Check for any misalignment in the hinges or locks and adjust as necessary.
Store the Thule Atlantis 685 in a cool, dry place. It can be hung on a wall using appropriate hooks or stored on a flat surface to prevent warping.