Thule 533 Instructions
![Thule 533 manual cover](/images/dfb898ae70662697937d230f/thumbs/thumb175x175.webp)
To install the Thule 533, first ensure that your roof rack is compatible. Align the U-bolts with the mounting holes on the rack, and secure them with the provided nuts, ensuring they are tight and secure.
The Thule 533 can support a maximum load of up to 3 pairs of skis or 2 snowboards, not exceeding a total weight of 40 lbs (18 kg).
Regularly check all the mounting hardware to ensure they are tight. After initial installation, inspect the fittings after the first 10 miles, then periodically during use.
Clean the Thule 533 with mild soap and water regularly, especially after exposure to salt or dirt. Lubricate the locks with graphite or silicone spray to ensure smooth operation.
Yes, the Thule 533 is equipped with a locking mechanism to secure your skis or snowboards, preventing theft when parked.
If the lock is jammed, apply a small amount of graphite or silicone lubricant into the lock cylinder and gently work the key back and forth to free it. Avoid forcing the key to prevent damage.
The Thule 533 is compatible with most Thule roof racks, including square and round bar systems. However, always verify compatibility with your specific rack model.
To adjust for different sizes, ensure the carrier's upper arm can close securely over the equipment. Adjust the position of the U-bolts if needed to accommodate different widths.
Drive with caution, particularly in high winds. Check that all equipment is properly secured before driving and obey speed limits to ensure safety and prevent damage.
To reduce noise, ensure that the Thule 533 is tightly secured to the roof rack. Consider using a wind fairing to minimize aerodynamic noise.