Contents

Owners Information Manual
- A09033
- Fig. 1 Unit PAR5
  - Safety Considerations
    - Starting or Shutting Unit Off
      - 1. Turn on the electrical power supply to unit.
      - 2. Select temperature and set MODE control to desired mode.
      - 1. Set system MODE control to OFF.
      - 2. Turn off the electrical power supply to unit.
  - Operating Your Unit
    - Cooling Mode
    - Heating Mode (if installed with optional electric heat)
  - Maintenance and Service
    - Routine Maintenance
    - Maintenance and Care for the Equipment Owner
      - 1. TURN OFF ELECTRICAL POWER TO YOUR UNIT BEFORE SERVICING OR PERFORMING MAINTENANCE. Lock out and tag switch with a suitable warning label.
      - 2. When removing access panels or performing maintenance functions inside your unit, be aware of sharp sheet metal parts and screws. Although special care is taken to reduce sharp edges to a minimum, be extremely careful when handling parts or reachi...
    - Air Filters
      - Table 1 Indoor Air Filter Data
        
        1. Remove the filter access panel using a 5/16-in. nut driver.
        
        2. Remove the filter(s) by pulling it out of the unit. If the filter(s) is dirty, clean or replace with a new one.
        
        3. Reinstall filter access panel ensuring opening is air and water tight.
      - Fig. 2 Unit Access Panel
    - Fans and Fan Motors
    - Indoor and Outdoor Coils
    - Condensate Drain
    - Compressor
    - Condenser Fan
    - Electrical Controls and Wiring
    - Refrigerant Circuit
    - Unit Panels
    - Regular Dealer Maintenance (Also see Table 2)
      - 1. Inspection and, if required, cleaning of the outdoor and indoor coils.
      - 2. Inspection and, if required, cleaning of the indoor coil drain pan.
      - 3. Inspection and cleaning of blower wheel housing and motor.
      - 4. Inspection of all supply-air and return-air ducts for leaks, obstructions, and insulation integrity. Any problems found should be resolved at this time.
      - 5. Inspection of the unit base to ensure that no cracks, gaps, etc., exist which may cause a hazardous condition.
      - 6. Inspection of the unit casing for signs of deterioration.
      - 7. Inspection of all electrical wiring and components to assure proper connection.
      - 8. Inspection for leaks in the refrigerant circuit. Pressure check to determine appropriate refrigerant charge.
      - 9. Operational check of the unit to determine working conditions. Repair or adjustment should be made at this time.
    - Warranty Certificate
    - Before you call for service...
    - In Case of Trouble
      - Table 2 Maintenance Checklist

Tempstar PAR5 Owner's Manual

Tempstar PAR5 Air Conditioner manual cover

Pages 5

Year 0

Language(s)

of 5

Tempstar PAR5 Air Conditioner Specification

The Tempstar PAR5 Air Conditioner is a sophisticated cooling system designed for residential applications, offering a blend of efficiency, durability, and advanced technology. It features a high-efficiency two-stage compressor that enhances comfort by optimizing cooling performance and reducing energy consumption. The unit operates with a Seasonal Energy Efficiency Ratio (SEER) rating of up to 17, ensuring significant energy savings and adherence to modern efficiency standards.

Constructed with a galvanized steel cabinet for enhanced durability, the PAR5 is designed to withstand various weather conditions. It incorporates a corrosion-resistant coil that extends the unit's operational life while maintaining peak performance. The air conditioner is equipped with a quiet operation system, utilizing a variable-speed fan motor that minimizes noise, making it ideal for residential environments.

The PAR5 also includes advanced diagnostics capabilities through its Comfort Alert™ diagnostics system, which monitors operation and provides timely alerts for any potential issues, facilitating easier maintenance and repair. This feature ensures continuous optimal performance and prolongs the lifespan of the unit.

For user convenience, the air conditioner is compatible with smart thermostats, allowing for remote operation and integration into home automation systems. This capability provides users with enhanced control over their home climate settings from any location. The Tempstar PAR5 Air Conditioner is designed with eco-friendly refrigerant, R-410A, which is chlorine-free and contributes to reduced environmental impact.

In summary, the Tempstar PAR5 Air Conditioner combines high efficiency, robust construction, and intelligent technology to deliver reliable and quiet cooling, making it an ideal choice for homeowners seeking comfort and energy savings.

Tempstar PAR5 Air Conditioner F.A.Q.

How do I change the air filter on my Tempstar PAR5 air conditioner?

To change the air filter, first turn off the unit. Locate the filter compartment, usually near the return air duct. Open the compartment, remove the old filter, and insert a new one of the same size. Ensure the arrow on the filter points in the direction of the airflow, then close the compartment and turn the unit back on.

What should I do if my Tempstar PAR5 air conditioner is not cooling properly?

If your air conditioner isn't cooling, check the thermostat settings, ensure the air filter is clean, and inspect the outdoor unit for debris. If these steps don't help, it might be a refrigerant issue or a faulty component, which should be addressed by a professional technician.

How often should I schedule maintenance for my Tempstar PAR5 air conditioner?

It's recommended to schedule professional maintenance for your Tempstar PAR5 air conditioner at least once a year, preferably before the cooling season begins, to ensure optimal performance and longevity.

What are the common error codes on a Tempstar PAR5 air conditioner and their meanings?

Common error codes include E1 (sensor failure), E2 (high pressure protection), and E3 (low pressure protection). Refer to your user manual for a complete list and contact a professional technician for persistent issues.

How do I reset my Tempstar PAR5 air conditioner?

To reset your unit, turn off the air conditioner at the thermostat, then turn off the circuit breaker for the unit. Wait about 30 seconds before turning the circuit breaker and the unit back on.

What should I check if my Tempstar PAR5 air conditioner is leaking water?

If your unit is leaking water, check the condensate drain line for clogs and ensure the unit is properly leveled. If the issue persists, it may be due to a frozen evaporator coil or low refrigerant, which requires professional attention.

Can I install my Tempstar PAR5 air conditioner myself?

Installation of the Tempstar PAR5 air conditioner should be performed by a licensed HVAC professional to ensure proper setup, safety, and warranty compliance.

What size circuit breaker is required for a Tempstar PAR5 air conditioner?

Refer to the specification label on your unit or the installation manual to determine the correct circuit breaker size. Typically, a dedicated 20-30 amp breaker is required, depending on the model's power requirements.

How can I improve the energy efficiency of my Tempstar PAR5 air conditioner?

To enhance energy efficiency, ensure regular maintenance, clean or replace air filters regularly, seal any duct leaks, and consider using a programmable thermostat.

What should I do if the Tempstar PAR5 air conditioner makes unusual noises?

Unusual noises can indicate loose components, debris in the outdoor unit, or motor issues. Turn off the unit and inspect it visually. If the source of the noise is not easily identified, contact a professional technician for a thorough inspection.