TC Electronic BUCKET BRIGADE ANALOG DELAY Quick Start Guide

To connect the BUCKET BRIGADE ANALOG DELAY, plug your guitar into the input jack, then connect the output jack to your amplifier or the next pedal in your effects chain.
The BUCKET BRIGADE ANALOG DELAY requires a 9V DC power supply with a negative center pin.
Ensure all cables are properly connected and in good condition. Use isolated power supplies to prevent ground loops.
The BUCKET BRIGADE ANALOG DELAY is designed for mono use. However, you can use a stereo splitter after the pedal if needed.
The BUCKET BRIGADE ANALOG DELAY offers a maximum delay time of 600 milliseconds.
Use the 'Time' knob on the pedal to adjust the delay time to your preference. Clockwise increases the delay time, while counterclockwise decreases it.
Check the power supply and cables for any issues. Ensure that the pedal is not in bypass mode. If problems persist, try resetting the pedal or consult the user manual for troubleshooting tips.
Keep the pedal clean and dry. Regularly check and replace cables as necessary. Avoid exposing the pedal to extreme temperatures or moisture.
Yes, the BUCKET BRIGADE ANALOG DELAY can be used with a bass guitar to create rich, dynamic delay effects.
Set the 'Time' knob to a short delay time and adjust the feedback to a low setting. This will create a quick, single-repeat delay typical of slapback effects.