Tata Tiago Owner's Manual 2018
![Tata Tiago Car 2018 manual cover](/images/mbRncCduItDbBrffhKsIEzQZ/thumbs/thumb175x175.webp)
To reset the service light on your Tata Tiago 2018, turn the ignition to the 'ON' position without starting the engine. Press and hold the trip button on the dashboard until the service light starts blinking, then release and press it again to reset.
The recommended tire pressure for the Tata Tiago 2018 is typically 30 PSI for both front and rear tires. However, always refer to the sticker on the driver’s side door jamb for the most accurate information.
To improve fuel efficiency, maintain a steady speed, avoid aggressive driving, ensure regular maintenance, check tire pressure monthly, and remove unnecessary weight from the car.
The Tata Tiago 2018 generally uses 5W-30 grade engine oil. Check the owner’s manual for any specific recommendations based on your driving conditions.
To change the headlight bulb, open the hood and locate the back of the headlight assembly. Disconnect the power connector, remove the rubber cover, and unclip the bulb. Replace it with a new bulb, ensuring not to touch the glass part. Reassemble in reverse order.
If the battery keeps dying, check for any lights or electronics left on, test the alternator, and inspect the battery for corrosion. Consider replacing the battery if it’s old or unable to hold a charge.
It's recommended to change the air filter every 15,000 to 20,000 kilometers or once a year, whichever comes first. More frequent changes may be needed if you drive in dusty conditions.
To check the transmission fluid, warm up the engine, park on a level surface, and keep the engine running. Locate the transmission dipstick, remove it, wipe it clean, and insert it back. Pull it out again to check the fluid level and condition.
A squealing noise on startup may be due to a loose or worn-out serpentine belt. Inspect the belt for wear and proper tension, and replace it if necessary.
To pair your phone, turn on Bluetooth on your phone and the car's infotainment system. Select 'Bluetooth' on the system, and choose 'Pair New Device.' Your phone should detect the car's system; select it and confirm the pairing code to complete the process.