Tata Altroz BSVI Owner's Manual
![Tata Altroz BSVI Car manual cover](/images/RNPJlFriTOEVnvHetREORvzl/thumbs/thumb175x175.webp)
To check the engine oil level, ensure the car is on a level surface and the engine is cool. Open the hood, locate the dipstick, pull it out, and wipe it clean. Reinsert it fully, then remove it again to check the oil level. The oil should be between the minimum and maximum marks on the dipstick.
If the 'Check Engine' light comes on, it’s advisable to have the car diagnosed by a professional. It could indicate a range of issues, from minor to serious. Avoid driving extensively until the issue is addressed.
The air filter should generally be replaced every 15,000 to 20,000 kilometers, but it’s best to refer to your owner's manual for the specific interval. Regular checks are advisable, especially if driving in dusty conditions.
To reset the service light, turn the ignition to the 'on' position without starting the engine. Press the accelerator pedal fully three times within 10 seconds. Turn off the ignition, then start the car to see if the light has reset.
The recommended tire pressure for the Tata Altroz BSVI is typically around 32 PSI for both front and rear tires. However, always refer to the sticker inside the driver’s side door or the owner’s manual for exact specifications.
To improve fuel efficiency, ensure regular maintenance, keep tires properly inflated, drive smoothly avoiding sudden starts and stops, and reduce excess weight in the car. Using the recommended grade of oil also helps.
Common causes include leaving lights on, a faulty alternator, parasitic drain from electrical components, or a battery that needs replacement. Regular checks and maintenance can help prevent battery issues.
To pair your smartphone, enable Bluetooth on your phone, access the infotainment system's Bluetooth menu, and select 'pair new device'. Choose your phone from the list and confirm the pairing code.
If your car is overheating, safely pull over and turn off the engine. Allow it to cool before checking coolant levels. If low, add coolant or water in an emergency. Seek professional help if the issue persists.
To change a flat tire, ensure the car is on a stable surface, apply the parking brake, and place wheel chocks. Use the jack to lift the car, remove the lug nuts with a wrench, replace the tire, tighten the lug nuts in a crisscross pattern, and lower the car.