Subaru WRX Premium Starlink 2019 Manual

To connect your smartphone, ensure Bluetooth is enabled on your phone. Access the Starlink system on your car's touchscreen, navigate to 'Settings', select 'Bluetooth', and then 'Add Device'. Your vehicle's system will search for nearby devices. Select your phone from the list and confirm the connection on both your phone and the Starlink system.

Subaru recommends regular maintenance checks every 6,000 miles or 6 months, whichever comes first. This includes oil changes, tire rotations, brake inspections, and fluid level checks. Refer to the owner's manual for a detailed maintenance schedule.

First, check if the volume is turned up and the audio source is correct. If the problem persists, try restarting the Starlink system by turning off the car and restarting it. Ensure that all cables and connections are secure. If the issue continues, consult your local Subaru dealer.

The Subaru WRX Premium 2019 typically requires synthetic 5W-30 motor oil. Always check your owner's manual or consult with a Subaru service professional to confirm the best oil type for your vehicle.

Software updates for the Starlink system can typically be done over-the-air if your car is connected to Wi-Fi. Alternatively, visit your local Subaru dealership to have them perform the update. Ensure your vehicle is parked and the ignition is in the accessory position during updates.

If the check engine light illuminates, it's important to address it promptly. Check if the gas cap is securely tightened, as a loose cap can trigger the light. If the light remains on, schedule a diagnostic check with a Subaru service center to determine the cause.

To improve fuel efficiency, ensure your tires are correctly inflated, and keep up with regular maintenance such as oil changes and air filter replacements. Avoid rapid accelerations and try to maintain a steady speed. Using cruise control on highways can also assist in conserving fuel.

The recommended tire pressure for the Subaru WRX Premium 2019 is typically 33 psi for both the front and rear tires. Always check the tire placard located on the driver’s side door jamb for the most accurate information.

To replace the cabin air filter, open the glove box and remove the retaining arm on the side. Press in on the sides of the glove box to release it from the dashboard. Behind it, you'll find the air filter compartment. Open it, remove the old filter, and insert a new one, ensuring the airflow direction is correct.

If your battery frequently dies, check for any lights or electronics left on when the vehicle is off. Ensure the battery terminals are clean and secure. If the problem persists, the battery may need to be tested or replaced. Visit a Subaru service center for a comprehensive electrical system check.