Subaru WRX Base Starlink 2021 Manual
![Subaru WRX Base Starlink 2021 Sports Car manual cover](/images/DlTPMyNXMOsWVNXycYKUFWGX/thumbs/thumb175x175.webp)
The recommended oil type for the 2021 Subaru WRX is synthetic 5W-30 oil, which helps ensure optimal engine performance and longevity.
To connect your smartphone, activate Bluetooth on your device, then access the Bluetooth settings on the Starlink infotainment system and select "Pair Device." Follow the on-screen instructions to complete the pairing process.
The recommended tire pressure for the Subaru WRX 2021 is typically 33 psi for the front tires and 32 psi for the rear tires. Always refer to the sticker on the driver’s side door jamb for the most accurate information.
It is recommended to replace the air filter every 15,000 to 30,000 miles, depending on driving conditions. Check it regularly for dirt and debris, especially if you frequently drive in dusty environments.
If the Starlink system freezes, try restarting your vehicle. If the issue persists, perform a system reset by pressing and holding the power button on the infotainment system for about 10 seconds until it reboots.
To improve fuel efficiency, ensure regular maintenance such as timely oil changes, proper tire inflation, and clean air filters. Additionally, consider driving habits like smooth acceleration and maintaining steady speeds.
To change a flat tire, first secure the vehicle on a flat surface, use the jack to lift the car, remove the hubcap and loosen the lug nuts, replace the tire with the spare, tighten the lug nuts, lower the car, and finally fully tighten the lug nuts in a crisscross pattern.
To update the navigation maps, visit the Subaru website to download the latest map update to a USB drive. Insert the USB into the Starlink system, follow the on-screen instructions to complete the update process.
The maintenance schedule includes oil and filter changes every 6,000 miles, tire rotations every 12,000 miles, and brake inspections every 12,000 miles. Refer to the owner’s manual for a detailed schedule.
To enable Subaru EyeSight, ensure the system is activated via the settings menu on the Starlink display. The system will automatically engage when you drive, provided the cameras and sensors are unobstructed.