Subaru WRX Base Starlink 2020 Manual
![Subaru WRX Base Starlink 2020 Sports Car manual cover](/images/dzSyVkShNZNloDgcIsDtLiJn/thumbs/thumb175x175.webp)
To connect your smartphone, turn on Bluetooth on your phone, go to the Starlink system menu, and select 'Pair Device'. Follow the on-screen instructions to complete the pairing process.
If the Starlink system freezes, you can try resetting it by holding down the power button for about 10 seconds until it restarts. If the issue persists, consider consulting your Subaru dealer.
Subaru recommends changing the oil every 6,000 miles or 6 months, whichever comes first, for optimal engine performance.
The Subaru WRX 2020 requires premium unleaded gasoline with an octane rating of 91 or higher for optimal performance.
To improve fuel efficiency, ensure your tires are properly inflated, use cruise control on highways, and avoid rapid acceleration and hard braking. Regular maintenance also helps.
The recommended tire pressure for the Subaru WRX 2020 is typically 33 psi for the front and 32 psi for the rear tires. Always consult your owner's manual or the tire placard for specific recommendations.
Software updates for the Starlink system can be downloaded via Wi-Fi or through a Subaru dealer. Check the system settings menu for available updates or consult your dealer for assistance.
To disable the auto start-stop feature temporarily, press the auto start-stop button located on the dashboard. Keep in mind that this will reset when you restart the car.
Regular maintenance checks should include oil and filter changes, brake inspections, tire rotations, and fluid level checks. Refer to the owner's manual for detailed maintenance schedules.
If the check engine light comes on, ensure the gas cap is tightly closed as a first step. If the light remains on, schedule a diagnostic check with a Subaru service center to identify any underlying issues.