Subaru WRX 2016 Manual
![Subaru WRX 2016 Sports Car manual cover](/images/BQIxjpOSjVJFODJXELuufBhY/thumbs/thumb175x175.webp)
The recommended oil type for the 2016 Subaru WRX is 5W-30 synthetic oil. The oil change interval should be every 6,000 miles or 6 months, whichever comes first.
To reset the TPMS on a 2016 Subaru WRX, ensure all tires are inflated to the correct pressure. Drive the vehicle above 20 mph for at least 10 minutes, and the system should automatically reset.
To check the transmission fluid level, warm up the engine, park on a level surface, and keep the engine running. Locate the dipstick, remove it, wipe it clean, reinsert it, and then pull it out again to check the fluid level.
To pair your smartphone, turn on the car's infotainment system and navigate to the Bluetooth settings. Enable Bluetooth on your phone, search for the car's system, and select it to pair. Enter the provided passkey if prompted.
The 2016 Subaru WRX is not designed for towing, and Subaru does not recommend using it to tow any trailers.
To replace the cabin air filter, open the glove box, remove the dampener arm, and release the glove box stops. Locate the filter cover behind the glove box, remove it, and replace the old filter with a new one.
Common causes for a Check Engine Light in the 2016 Subaru WRX include a loose gas cap, faulty oxygen sensor, malfunctioning catalytic converter, or issues with the mass airflow sensor. It’s advisable to use an OBD-II scanner to diagnose the issue.
To store your 2016 Subaru WRX, fill the fuel tank, inflate tires to the recommended pressure, disconnect the battery, and use a car cover. It’s also advisable to change the oil and filter before storage.
A rattling noise from the engine could be due to a loose heat shield, worn timing belt tensioners, or low oil levels. It's recommended to have a professional mechanic inspect the vehicle to diagnose and resolve the issue.
To adjust the headlights, park your vehicle on a level surface facing a wall. Use the adjustment screws located on the headlight assembly to align the beam to the desired height and direction. Consult the owner's manual for specific adjustment instructions.