Subaru Forester 2.0XT Premium Compass 2015 Mirror Guide
![Subaru Forester 2.0XT Premium Auto-Dimming Compass 2015 manual cover](/images/EbEcYxCpeeVZGgqEfYRabhJS/thumbs/thumb175x175.webp)
To set up the auto-dimming rearview mirror with compass, first ensure the vehicle is parked. Press and hold the power button on the mirror until the green indicator light turns on. This activates the auto-dimming feature. To calibrate the compass, drive to an open area, press and hold the compass button until the direction shows, and then drive in a circle until the compass is calibrated.
Subaru recommends an oil change every 6,000 miles or 6 months. The air filter should be replaced every 12,000 miles, and the brake fluid should be checked every 30,000 miles. Regular inspections of the tires, brakes, and battery are also advised. Always consult your owner's manual for the most accurate schedule.
First, check if the audio system is properly turned on and the volume is up. Ensure that the correct audio source is selected. Inspect the fuses related to the audio system. If the problem persists, try resetting the system by turning off the vehicle and restarting it. If none of these steps work, consult a professional technician.
For the 2015 Subaru Forester 2.0XT Premium, Subaru recommends using synthetic 5W-30 oil. This provides the best performance and protection for the turbocharged engine. Always refer to your owner's manual to confirm the recommended oil specifications.
To replace the cabin air filter, open the glove box and remove the damper cord. Press in on the sides of the glove box to release it from its housing. The cabin air filter compartment is located behind the glove box. Open the compartment, remove the old filter, and insert the new one, ensuring the airflow direction is correct.
Engine overheating can be caused by a variety of issues, such as low coolant levels, a faulty thermostat, or a malfunctioning radiator fan. Check the coolant level first and top off if necessary. Inspect for any leaks and ensure the radiator fan is operating. If the problem continues, seek professional mechanical assistance.
If the check engine light illuminates, ensure your gas cap is tightly secured as this is a common cause. If the light remains on, it is advisable to have the vehicle's diagnostic codes read by a professional to determine the specific issue. Avoid driving the vehicle if the light is flashing, as this indicates a more serious problem.
To improve fuel efficiency, maintain a steady driving speed, avoid rapid acceleration and braking, and ensure your tires are properly inflated. Regular maintenance, such as timely oil changes and air filter replacements, can also enhance fuel efficiency. Removing unnecessary weight from the vehicle can further improve performance.
Symptoms of a failing turbocharger include a noticeable loss of power, excessive exhaust smoke, a whining noise from the engine, and an illuminated check engine light. If you experience any of these symptoms, it is important to have the turbocharger inspected and repaired by a qualified technician.
To reset the TPMS, first inflate all tires to the recommended pressure. Turn the ignition to the "On" position without starting the engine. Press and hold the TPMS reset button, usually found under the dashboard or in the glove box, until the TPMS light blinks three times. Drive the vehicle for a few miles, and the system should recalibrate.