Subaru Crosstrek 2.0i Limited Starlink 2016 Manual
![Subaru Crosstrek 2.0i Limited Starlink 2016 manual cover](/images/inzlLluIFTZSQBWBvXUApELu/thumbs/thumb175x175.webp)
To connect your smartphone to the Starlink system, first ensure that Bluetooth is enabled on your phone. On the Starlink system, press the 'Phone' button and select 'Add Device'. Follow the prompts to pair your phone with the system.
Refer to the owner's manual for the detailed maintenance schedule. Generally, it includes oil changes every 6,000 miles, tire rotations every 7,500 miles, and brake inspections every 12,000 miles.
If the screen is unresponsive, try restarting the vehicle. If the problem persists, check for any software updates. If none are available, contact a Subaru dealer for further assistance.
The recommended oil type for the Subaru Crosstrek 2.0i Limited 2016 is 0W-20 synthetic oil, meeting the API certification mark.
To reset the TPMS light, inflate all tires to the recommended pressure specified on the tire placard. Drive the vehicle at a speed of 20 mph or higher for at least 10 minutes. If the light remains on, consult your dealer.
If the engine does not start, check the battery connections and ensure they are tight. If the issue persists, the battery might be dead and require a jump start or replacement.
To update the navigation maps, visit the Subaru navigation update website and download the latest maps onto a USB drive. Insert the USB drive into the vehicle's USB port and follow the on-screen instructions to update.
The towing capacity of the Subaru Crosstrek 2.0i Limited 2016 is 1,500 pounds. It is important to not exceed this limit to ensure safe towing.
Improving fuel efficiency can be achieved by maintaining proper tire pressure, reducing excess weight in the vehicle, and ensuring regular maintenance. Additionally, driving at moderate speeds and avoiding rapid acceleration can help.
To change the cabin air filter, open the glove box and remove the damper. Press in both sides of the glove box to release it. Locate the filter housing, remove the old filter, and replace it with a new one. Reassemble the glove box components.