s SXS909 User Manual
![Stoves SXS909 manual cover](/images/FAwuSqUReRnDUyxGynaAtpDh/thumbs/thumb175x175.webp)
To clean the burners, first ensure they are completely cool. Remove the burner caps and soak them in warm soapy water. Use a non-abrasive scrubber to clean away any residue, then rinse and dry them thoroughly before reassembling.
Check if the oven is correctly plugged in and the circuit breaker is not tripped. Ensure the temperature settings are correct and the door is fully closed. If the problem persists, it may require professional servicing.
Yes, aluminum foil can be used, but only on the oven racks to catch drips. Avoid lining the oven floor with foil, as it can interfere with heat circulation and affect cooking performance.
First, disconnect the oven from the power supply. Locate the bulb cover inside the oven, unscrew it, and remove the old bulb. Replace it with a new bulb of the same type and wattage, then reattach the cover and reconnect the power.
Continuous clicking might be caused by moisture or food debris in the igniter area. Clean the igniter and ensure it is dry. If the problem continues, there may be an issue with the ignition switch or wiring, requiring professional attention.
To calibrate the oven temperature, refer to the user manual for instructions specific to your model. Typically, this involves accessing the calibration settings through the oven control panel and adjusting as needed.
For best results, use flat-bottomed cookware that matches the size of the burners. Materials like stainless steel, cast iron, and heavy-duty aluminum are recommended for optimal heat distribution and efficiency.
Ensure that the door seal is intact and clean. Avoid blocking the vent openings, as proper airflow is essential to maintaining a safe exterior temperature. If the door continues to get excessively hot, it may need inspection by a technician.
The self-cleaning function can be used, typically every few months or as needed, depending on usage. Follow the manufacturer's instructions for operating the self-clean cycle, ensuring proper ventilation during the process.
Uneven baking can occur if the oven racks are not placed correctly. Ensure racks are evenly spaced and avoid overcrowding the oven. Additionally, verify that the oven is preheated to the correct temperature before baking.