Snaigė R 13SM-PRDL0F3 Retro Instructions For Use
![Snaigė R 13SM-PRDL0F3 Retro Refrigerator manual cover](/images/ZOVVFRxxgaAwVqJCDCLMFvbe/thumbs/thumb175x175.webp)
To adjust the temperature, locate the thermostat dial inside the refrigerator compartment. Turn the dial clockwise to lower the temperature and counterclockwise to raise it.
Ensure that the refrigerator is plugged in and the thermostat is set to the correct temperature. Check the door seals for any gaps and clean the condenser coils at the back of the unit to improve airflow.
This model is equipped with an automatic defrost system. However, if you notice excessive frost buildup, manual defrosting might be necessary.
Remove all food items and shelves. Use a mixture of warm water and mild detergent to wipe down the interior surfaces. Rinse with clean water and dry thoroughly before replacing shelves and food.
Unusual noises can be caused by vibrations, loose components, or the refrigerator being unlevel. Ensure the appliance is on a flat surface and check for any loose parts.
Keep the refrigerator away from heat sources, ensure the door seals are intact, and avoid overloading the refrigerator to maintain efficient cooling.
Inspect the seal for any visible damage. If necessary, replace it with a compatible door gasket to ensure a proper seal and maintain cooling efficiency.
Yes, the door swing can be reversed. Refer to the user manual for detailed instructions or contact customer service for assistance.
Unplug the refrigerator and locate the light cover inside the compartment. Remove the cover and replace the bulb with a new one of the same type and wattage.
Check if the defrost drain is clogged. Clean it with warm water and a mild detergent. Ensure that the refrigerator is level to prevent water from pooling.