Škoda Yeti Radio Swing 2011 Owner's Manual
![Škoda Yeti Radio Swing 2011 Car manual cover](/images/OzOouDkayRfEeItesNywHeLn/thumbs/thumb175x175.webp)
To pair your phone, first ensure Bluetooth is enabled on your phone. On the Radio Swing system, press the 'Menu' button, navigate to 'Setup', and select 'Bluetooth'. Choose 'Pair new device' and select your phone from the list. Confirm the pairing code on both devices to complete the connection.
Check the fuse associated with the radio in the fuse box under the dashboard. If the fuse is intact, verify that the battery is charged and the connections to the radio are secure. If the issue persists, consult a professional technician.
To reset the system, press and hold the 'Setup' button until the display shows 'Factory settings'. Use the control knob to select 'Yes' and confirm with the 'OK' button. This will reset the radio to its default settings.
Software updates for the Radio Swing system typically require a visit to a Škoda service center. They will have the necessary tools and software to perform the update. It's recommended to check with them if an update is available for your model.
Press the 'Menu' button and navigate to 'Sound'. From there, you can adjust the bass, treble, balance, and fader settings to your preference using the control knob.
Check if the volume is turned up and the mute function is off. Ensure that the audio source is correctly selected. If the problem continues, inspect the speaker connections and wiring for any damage or loose connections.
Yes, insert the USB drive into the USB port. The system will automatically detect it, and you can use the 'Media' button to browse and play your music files. Ensure your files are in a compatible format like MP3.
Tune to the desired radio station using the 'Tune' knob. Press and hold one of the preset buttons (1-6) until you hear a beep, indicating the station has been saved to that preset.
Check the dashboard light settings to ensure the display brightness is not turned all the way down. If the issue is not resolved, there may be a problem with the display connections or the unit itself, requiring professional inspection.
Ensure the antenna is fully extended and properly connected. Avoid using electrical devices that can cause interference. If reception is still poor, consider installing a signal booster or consulting with a professional for further assistance.