Škoda Yeti Radio Blues 2016 Owner's Manual
![Škoda Yeti Radio Blues 2016 Car manual cover](/images/DRLDkiktsNKBLfrMuOcMAfDI/thumbs/thumb175x175.webp)
To pair your smartphone, ensure Bluetooth is enabled on your phone. On the Radio Blues, navigate to the Bluetooth menu and select 'Pair New Device'. On your phone, search for available devices and select 'Škoda Radio'. Confirm pairing on both devices if prompted.
First, check the car's fuse box for a blown fuse related to the radio. If the fuse is intact, ensure that the battery connections are secure. If the problem persists, it may require professional diagnostic from a service center.
For better radio reception, check the antenna for damage or looseness. Ensure that it is fully extended and properly connected. Consider using a signal booster if you are frequently in areas with poor reception.
To reset the radio, enter the setup menu and look for the 'Reset' option. Follow the prompts to confirm the reset. Note that this will erase all custom settings and paired devices.
The Škoda Yeti Radio Blues typically supports USB drives formatted in FAT32. Ensure that music files are in commonly supported formats such as MP3 or WMA for smooth playback.
This issue may arise if the USB is not formatted correctly or the files are in an unsupported format. Try reformatting the USB drive to FAT32 and ensure that the files are MP3 or WMA. Also, check the USB port for any debris or damage.
Visit the official Škoda website to check for available firmware updates. Download the update to a USB drive. Insert the USB into your vehicle's port and follow the on-screen instructions to complete the firmware update.
To set radio stations, use the tuning knob or buttons to find your desired station. Press and hold the preset button where you want to store the station until you hear a beep, indicating the station has been saved.
Static noise can be caused by interference from other electronic devices or poor grounding of the radio system. Check the antenna connection and ensure all electronic devices in the car are properly shielded.
To switch between AM and FM bands, press the 'Band' button on the radio interface. Continue pressing until you reach the desired band. The display will indicate the current band selection.