Škoda Superb II 2014 Owner's Manual

To reset the TPMS, start the car and use the infotainment system to navigate to the car settings menu. Select "Tyre Pressure Monitoring" and follow the on-screen instructions to reset the system. The vehicle must be stationary during this process.
The recommended engine oil for the Škoda Superb II 2014 is fully synthetic oil with a viscosity grade of 5W-30, conforming to VW 502.00/505.00 specifications. Always check your owner’s manual to confirm compatibility.
To connect your smartphone, ensure Bluetooth is enabled on your phone. On the car's infotainment system, navigate to "Settings", select "Bluetooth", and then "Pair Device". Follow the prompts on both your phone and the car's system to complete the pairing.
First, turn off the engine and open the bonnet. Remove the cover from the back of the headlight assembly. Disconnect the power connector, remove the old bulb by twisting it counterclockwise, and replace it with a new one. Reconnect the power and replace the cover.
To perform a factory reset, access the settings menu on the infotainment system. Scroll to "System Settings" and select "Factory Reset". Confirm your selection when prompted. This will erase all personal data, so ensure you have backups if necessary.
The recommended tire pressure for the Škoda Superb II 2014 typically ranges from 32 to 35 PSI for both front and rear tires. Always check the driver's side door jamb or the owner’s manual for specific values.
Start by checking the air conditioning settings to ensure they are correct. Verify that the cabin air filter is clean and not clogged. If the issue persists, inspect the refrigerant levels and examine the compressor for any signs of failure. Consult a professional if necessary.
Regular maintenance should include oil changes every 10,000 miles or annually, brake inspections every 20,000 miles, and a comprehensive check-up every 40,000 miles. Refer to the owner’s manual for a detailed schedule.
To replace the windscreen wipers, lift the wiper arm away from the windscreen. Press the small tab on the wiper blade to release it from the arm. Attach the new blade by sliding it into the arm until it clicks into place.
Check the battery connections and ensure the battery is charged. Verify that the fuel tank is not empty and the fuel pump is functioning. Inspect fuses and relays related to the ignition system. If these steps fail, consult a professional mechanic.