Škoda Superb II 2012 Owner's Manual

To reset the service light, turn off the ignition. Press and hold the trip reset button on the dashboard. While holding the button, turn the ignition to the "On" position without starting the engine. Release the button and turn the ignition off.
The recommended engine oil for the Škoda Superb II 2012 is typically 5W-30 fully synthetic oil. Always refer to the owner's manual for the specific oil grade recommended for your engine type.
Poor fuel economy can be due to several factors including incorrect tire pressure, clogged air filters, or worn spark plugs. Regular maintenance and checks can help improve fuel efficiency.
To change the headlight bulb, open the hood and locate the headlight assembly. Remove the cover and disconnect the electrical connector. Release the retaining clip and remove the old bulb. Insert the new bulb, secure the clip, reconnect the connector, and replace the cover.
Common issues with the DSG transmission include jerky shifts and hesitation. Regular servicing and DSG oil changes every 40,000 miles can help prevent these problems.
Water leakage in the trunk can often be due to blocked drainage channels or worn seals. Check and clean the drainage channels and inspect the seals for any signs of wear or damage. Replace seals if necessary.
To replace the battery in the key fob, press the button to release the key blade. Use a small screwdriver to gently pry open the fob casing. Replace the old battery with a new CR2032 battery, ensuring the correct orientation, and snap the fob casing back together.
To update the navigation system, you will need to obtain the latest map updates from the Škoda website or authorized dealer. Follow instructions to download the update onto an SD card and insert it into the vehicle’s navigation system slot.
If the air conditioning stops working, common causes include a low refrigerant level, a faulty compressor, or a blown fuse. It's advisable to have a professional diagnose and repair the air conditioning system.
To pair your phone, ensure Bluetooth is activated on your phone. On the car’s infotainment system, select 'Phone' and then 'Pair Device'. Follow the prompts to pair and connect your phone. Enter the PIN displayed on the car screen into your phone if required.