Škoda Rapid Spaceback 2018 Owner's Manual

To reset the tire pressure monitoring system, turn the ignition on, press the 'Car' button on the infotainment system, select 'Vehicle Status', then 'Tire Pressure', and finally 'Set'. Confirm the action to reset the system.
The recommended engine oil for the Škoda Rapid Spaceback 2018 is the synthetic 5W-30 oil that meets the VW 504 00/507 00 specifications.
To replace the cabin air filter, locate the filter housing under the glove compartment, remove the cover, slide out the old filter, and insert the new filter in the correct orientation. Replace the cover securely.
Enable Bluetooth on your smartphone, go to the Škoda Rapid infotainment system, select 'Phone', then 'Find Telephone'. Select your phone from the list and confirm the pairing code on both devices.
To check the brake fluid level, open the hood and locate the brake fluid reservoir near the back of the engine bay. Ensure the fluid level is between the 'MIN' and 'MAX' marks on the reservoir.
The recommended maintenance schedule includes an oil and filter change every 10,000 miles or 12 months, a brake inspection every 20,000 miles, and a comprehensive inspection every 40,000 miles.
To improve fuel efficiency, maintain optimal tire pressure, reduce excess weight, use cruise control on highways, and ensure regular maintenance such as timely oil changes and air filter replacements.
If the engine coolant temperature warning light comes on, safely pull over, turn off the engine, and allow it to cool. Check the coolant level and top it up if necessary. Seek professional assistance if the problem persists.
To change a flat tire, ensure the car is on a level surface, apply the parking brake, and place wheel chocks. Loosen the lug nuts, jack up the car, remove the lug nuts completely, replace the tire, and tighten the lug nuts in a crisscross pattern. Lower the car and fully tighten the nuts.
To replace the windshield wipers, lift the wiper arm away from the windshield, press the tab on the wiper blade to release it, slide the blade off the arm, then attach the new wiper blade until it clicks into place.