Simplicity 990653 Landlord 3310V Parts Manual

To start the tractor, ensure the parking brake is engaged, the transmission is in neutral, and the PTO is disengaged. Turn the ignition key to the 'Start' position until the engine starts, then release it to the 'Run' position.
Check the battery connections for corrosion, ensure the fuel tank has fuel, and verify the spark plug is functioning. Also, make sure the safety switches are engaged.
Regular maintenance includes changing the oil and oil filter, cleaning the air filter, checking the tire pressure, and inspecting belts and blades for wear. Refer to the manual for specific intervals.
The recommended oil type is SAE 30 for temperatures above 32°F and 10W-30 for temperatures below 32°F. Always check the manual for specific brand recommendations.
Ensure the blades are sharp and balanced, check the tire pressure, and verify that the deck is level. Adjust the deck height as needed to maintain an even cut.
Inspect the PTO switch and wiring for damage, ensure the PTO belt is not worn or broken, and check the safety switches. Replace any faulty components.
The air filter should be checked before each use and replaced every 100 operating hours or annually, whichever comes first.
Clean the tractor thoroughly, change the oil, stabilize the fuel, and disconnect the battery. Store it in a dry, covered area to prevent rust and damage.
Raise the deck to its highest position, use a wrench to remove the blade bolt, and replace the old blade with a new one. Ensure the blade is installed correctly and securely tightened.
Install tire chains or weights to improve traction. Additionally, check that the tires are in good condition and inflated to the recommended pressure.