Simplicity 2691678-02 Prestige Parts Manual
![Simplicity 2691678-02 Prestige Tractor manual cover](/images/WqGtyGRIHfEBkMfvcyyDnzYl/thumbs/thumb175x175.webp)
To change the oil, first ensure the tractor is on a level surface. Turn off the engine and allow it to cool. Remove the oil drain plug and allow the oil to completely drain into a pan. Replace the drain plug and refill with the recommended oil type and quantity.
First, check the battery connections to ensure they are tight and free of corrosion. Verify the fuel level and that the fuel valve is open. Check the spark plug for fouling or damage. If the issue persists, consult the manual for further troubleshooting steps.
Clean the tractor thoroughly to remove dirt and debris. Change the oil and add fuel stabilizer to the fuel tank. Inflate the tires to the recommended pressure and store the tractor in a dry, covered location. Disconnect the battery or use a trickle charger.
Tire pressure should be checked before each use or at least once a month. Proper inflation ensures optimal traction and extends the life of the tires.
Use fresh, unleaded gasoline with an octane rating of 87 or higher. Avoid using gasoline with more than 10% ethanol content to prevent engine damage.
To adjust the cutting deck, park the tractor on a flat surface. Use the deck lift lever to set the desired height. For side-to-side adjustments, use the deck leveling bolts according to the instructions in the manual.
Check to ensure the blades are balanced and securely attached. Inspect the belts for wear or damage. Excessive vibration can also be caused by uneven tire pressure or loose components.
Ensure the tires are properly inflated and consider using tire chains for added traction. Adjust the cutting deck to an appropriate height and reduce speed to maintain control over rough ground.
Locate the air filter cover on the engine. Remove the cover and take out the old filter. Insert a new filter and replace the cover securely. Regular air filter maintenance ensures optimal engine performance.
Every 50 hours, check the engine oil level, clean the air filter, inspect the belts for wear, and lubricate all pivot points. Review the owner's manual for a complete list of maintenance tasks.