Simplicity 2691671-01 Broadmoor Parts Manual

To start the tractor, ensure it is on a level surface, sit on the seat, engage the parking brake, set the throttle to the choke position if the engine is cold, and then turn the ignition key to the start position.
Check if the battery is charged, ensure the spark plug is in good condition, verify the fuel level, and make sure the seat switch and parking brake are engaged.
Warm up the engine, turn it off, and remove the key. Place a container under the oil drain valve, open the valve, and allow the oil to drain completely. Replace the oil filter and refill with the recommended oil type.
The recommended tire pressure for the Simplicity 2691671-01 Broadmoor Tractor is typically around 10-14 PSI for the rear tires and 12-15 PSI for the front tires. Check the manual for specific guidance.
Check the mower deck for levelness, ensure the blades are sharp, and verify that the tire pressure is even on all tires. Additionally, inspect the deck belts for wear or damage.
It is recommended to sharpen the mower blades after every 25 hours of use or at the beginning of each mowing season to ensure a clean cut.
Clean the tractor, change the oil and filter, add fuel stabilizer to the tank, remove the battery and store it in a cool, dry place, and lubricate all moving parts. Cover the tractor or store it in a sheltered area.
Use the height adjustment lever located on the tractor's fender. Move the lever to the desired cutting height position, ensuring it locks into place securely.
Inspect the blades for damage or imbalance, check the engine mounts, and ensure all bolts and fasteners are tightened properly. Examine the belts for wear or misalignment.
Regularly perform scheduled maintenance, keep the tractor clean, store it properly during the off-season, and address any mechanical issues promptly to prevent further damage.