Simplicity 2691669-00 Regent S Parts Manual
![Simplicity 2691669-00 Regent S Tractor manual cover](/images/DNxsnOMnzWdaMrRdJnZVEbNR/thumbs/thumb175x175.webp)
Ensure the tractor is on a flat surface, sit on the seat, engage the parking brake, set the throttle to the 'fast' position, and turn the ignition key to start the engine.
The recommended tire pressure for the front tires is typically 14 psi and 10 psi for the rear tires. Always refer to your owner's manual for exact specifications.
To change the oil, run the engine for a few minutes to warm it up, stop the engine, and drain the old oil by removing the oil drain plug. Replace the oil filter and add new oil as specified in the owner's manual.
Check the battery connections, ensure the fuel tank has gas, inspect the spark plug, and make sure the safety switches are engaged. If the problem persists, consult a technician.
Sharpen the mower blades every 25 hours of use or at least once a mowing season to ensure clean cuts and maintain lawn health.
Use clean, fresh, unleaded gasoline with a minimum of 87 octane. Avoid using gasoline with more than 10% ethanol content.
Ensure the mower deck is level, check tire pressures, and inspect the blades for sharpness and damage. Adjust the deck height as needed.
Clean the tractor, change the oil, empty the fuel tank or add a fuel stabilizer, remove the battery, and store it in a dry place. Cover the tractor to protect it from dust and moisture.
To adjust the cutting height, use the height adjustment lever located beside the seat to set the desired mowing height.
Inspect the blades for balance and damage, check for loose parts, and ensure the engine is running smoothly. Balancing the blades or replacing them may be necessary.