Simplicity 2691668-02 Regent S Parts Manual
![Simplicity 2691668-02 Regent S Tractor manual cover](/images/VBbrxWhsxUWAVGdRPMNntQES/thumbs/thumb175x175.webp)
Ensure the parking brake is engaged, the PTO is disengaged, and the throttle is set to the choke position for a cold start. Turn the ignition key to the start position until the engine starts, then adjust the throttle as needed.
It is recommended to use SAE 30 oil for temperatures above 32°F (0°C) and 10W-30 for temperatures below 32°F (0°C). Always refer to the operator's manual for guidance on oil specifications.
Change the oil after the first 5 hours of use, then every 50 hours of operation or annually, whichever comes first. Always check the oil level before each use.
Check the battery connections, ensure the fuel tank is not empty, and verify that the spark plug is in good condition. Also, make sure the safety switches are engaged properly.
Regularly inspect the blades for wear and damage. Sharpen or replace them as needed. Always disconnect the spark plug before performing any maintenance to ensure safety.
Keep the blades sharp and balanced, mow when the grass is dry, and adjust the cutting height to suit the grass type and conditions. Regular maintenance of the mower deck is also crucial.
Check the PTO switch, inspect the belts for wear or damage, and ensure the deck is properly mounted. Also, verify that all safety interlocks are functioning correctly.
The recommended tire pressure is generally 10 psi for the front tires and 14 psi for the rear tires. Always check the tire sidewall for specific information related to your model.
Remove the air filter cover, take out the filter, and gently clean it with compressed air. If it is too dirty, replace it with a new one. Ensure it's dry before reinstalling.
Check the engine cooling fins for debris, ensure the oil level is adequate, and verify the air filter is clean. Avoid operating the tractor in extremely hot conditions for prolonged periods.