Simplicity 2691524-02 Legacy XL Parts Manual
![Simplicity 2691524-02 Legacy XL Tractor manual cover](/images/LAFUcPMyJIeoYjVaueRVswmQ/thumbs/thumb175x175.webp)
To start the tractor, ensure the parking brake is engaged, the PTO switch is off, and the transmission is in neutral. Insert the key into the ignition and turn it to the 'Start' position. Release the key once the engine starts.
Regular maintenance includes checking and changing the engine oil and filter, inspecting and cleaning the air filter, checking tire pressure, lubricating all grease points, and inspecting belts and blades for wear.
Check if the battery is fully charged, the fuel tank has fuel, the spark plug is clean, and all safety switches are functioning. Also, ensure that the fuel filter is not clogged and the air filter is clean.
Ensure the PTO switch is functioning correctly and the drive belt is properly aligned and tensioned. Inspect the mower deck for any obstructions and check the wiring connections to the PTO clutch.
The engine oil should be changed after the first 5 hours of use and every 50 hours thereafter. Always refer to the owner's manual for specific oil recommendations and procedures.
To adjust the cutting height, use the mower deck lift lever located on the right side of the operator's seat. Select the desired cutting height by moving the lever to the corresponding position.
Overheating can be caused by a dirty air filter, low coolant levels, a malfunctioning thermostat, or blocked cooling fins. Ensure all cooling components are clean and functioning properly.
To change the transmission fluid, park the tractor on a level surface. Remove the transmission drain plug and allow the old fluid to drain completely. Replace the drain plug and refill with the recommended transmission fluid as per the owner's manual.
Inspect the steering linkage for any wear or damage, and ensure all bolts and nuts are tightened. Check the power steering fluid level and top it off if necessary. Lubricate the steering components as outlined in the maintenance schedule.
Maintain proper tire pressure, regularly service the air and fuel filters, and ensure the engine is tuned correctly. Avoid overloading the tractor and use the appropriate throttle settings for the task at hand.